Hi Combo

With the Creality Hi Combo, you get the best of both worlds: The advanced Creality Hi 3D printer and the Creality CFS multi-material system. This power package gives you precise prints at breathtaking speed and the freedom to experiment with different materials and colours.

Creality Hi

Whether you're a beginner or a pro, the Creality Hi makes printing easier, faster and smarter than ever before. With state-of-the-art technology, intuitive operation and a design that is as stable as it is stylish, it takes your 3D printing experience to a new level.

Assembly in record time

Don't fancy complicated set-ups? The Creality Hi comes 95% pre-assembled. With just seven screws and a bit of wiring, you'll be ready for your first print in 8 minutes! Thanks to a simple quick-start guide, software setup and initial calibration are also child's play.

Stability combined with style

With its stylish full metal body made of aluminium alloy, the Creality Hi not only looks good, but also remains absolutely stable. A linear rail system on the X-axis and two linear rods on the Y-axis ensure butter-smooth movements and precise print quality.

Quick nozzle change, no clogging

The tri-metal nozzle with hardened steel tip can be replaced in no time at all. A titanium alloy heatbreak prevents heat build-up, while the copper alloy nozzle body heats up at lightning speed - for consistent and reliable prints.

FOC step servomotors for blazing speeds

With its FOC step servo motors, the axes whizz silently through the room - even at speeds of up to 500 mm/s!

• max. speed: 500 mm/s
• max. acceleration: 12000 mm/s2

Active vibration management

Thanks to a proprietary algorithm, the Creality Hi analyses vibrations at different printing speeds and neutralises them in a targeted manner. The result? Faster prints, less ringing and smooth, flawless surfaces.

Perfect first layer, every time

The Creality Hi 's automatic bed levelling system ensures that the base for your print is always in place: two independent lead screws keep the X-axis level, while a high-precision sensor in the toolhead meticulously scans the print bed and levels it precisely.

Ready for use in a flash thanks to the 1000-watt heating bed

The powerful 1000-watt AC heating bed heats up in record time: you can reach 60 °C in just 30 seconds and 100 °C in just 90 seconds. This saves you valuable preparation time and allows you to start printing faster.

Always informed thanks to acoustic signals

The Creality Hi 's integrated buzzer keeps you up to date at all times: Whether the print has been completed or unexpectedly paused - clear acoustic signals reliably inform you about the status of your print.

Further features:

• State-of-the-art extrusion technology with ultra-robust and wear-resistant metal gears,
• Filament cutter with durable blade that is magnetically retracted into position after cutting,
• Run-out extruder sensor monitors the consumption of the filament so that there is less residual waste when loading or unloading the filament,
• Built-in camera with privacy cap to protect privacy,
• Supports video surveillance and time-lapse videos,
• Quiet operation at only ~48 dB,
• Retractable 3.2 inch touchscreen display,
• Smart software: Creality OS, Creality Print 5.1 with ready-made presets, Creality Cloud, and much more,
• RFID chip in Creality filaments stores important information such as filament type, colour and other details - the printer recognises this automatically and ensures smooth filament management.

Creality CFS

The Creality CFS (Color Filament System) is an intelligent multi-material system with 4 spool slots that support multi-colour printing and the simultaneous use of different materials. If the device is combined with other colour filament systems, a total of 16 colours can be printed with a wide range of colour combinations.

The system automatically loads and unloads the filaments, eliminating the need for tedious manual filament changes. In addition, the well-sealed multicolour device with smart temperature and humidity indicators can be used as a filament drying box for storing the filaments.

Automatic RFID recognition of the materials is supported.

Tip: The CFS can hold four 1 kg spools with a diameter of 197-202 mm and a width of 42-68 mm. Creality filaments with cardboard spools are compatible with the CFS. Filaments such as PLA, PETG, ABS, ASA or PA-CF can be easily processed in the CFS; flexible materials such as TPU or wet filaments such as PVA/BVOH are not supported.

Technical specifications for Creality Hi:

Technical specifications for Creality CFS: